Concrete Driveway & Slab Cost Estimator

Build a line-by-line estimate for a concrete driveway, patio or slab. Material prices and labor rates adjust to your state, every price can be edited, and a public-works installed price is shown as a cross-check.

Prices for your area

Concrete Driveway & Slab Cost Estimator — ConcreteNear.com

Concrete to order 8 yd³ · $4,024
Concrete to order8 yd³
Area480 ft²
Gravel base10.2 tons
Crew time on site8 hr · about 1 eight-hour days

Cost estimate U.S. average prices

Ready-mix concrete
8 yd³ × $160.00
$1,280
Gravel base (incl. 15% compaction)
10.22 ton × $16.78
$171.53
Base delivery (1 load, 1.5 hr each)
1.5 hr × $106.69 × 1.25
$200.04
#4 rebar @ 18 in, placed
443.77 lb × $1.46
$647.91
Finishers (2)
16 hr × $28.87 × 2
$923.84
Laborers (2)
16 hr × $25.02 × 2
$800.64
Estimated total$4,024
Cross-check: Installed flatwork cross-check (4 in, public-works price)
480 ft² × $7.64
$3,667
  • Driveways for cars: 4–5 in on good base; trucks and RVs: 6 in with rebar.
  • Cut control joints at about 2–3× the slab thickness in feet (10–15 ft for a 5 in slab).
Email results
Inputs
Length24 ft
Width20 ft
Thickness5 in
Gravel base depth (0 = none)4 in
Reinforcement#4 rebar @ 18 in
FinishBroom / plain
Old concrete to remove (0 = none)0 ft²
Concrete pumpNo — truck can chute it
Crew size4
Crew output (ft² per crew-hour, prep → finish)60
Extra concrete8%

Planning estimate only — confirm with your supplier or contractor.

Prices used — edit any price to match your local quote
ItemUnit priceBasis & source
Ready-mix concrete
per yd³
public source NRMCA Performance Benchmarking Survey — average 2023 U.S. selling price per cubic yard (2023 data) — Plant price before delivery, short-load, wait-time and fuel fees. Concrete Financial Insights reports $179.95/yd³ for 2025 across four public producers (likely higher than small residential pours).
Crushed stone / gravel at the quarry
per ton
derived from source USGS Mineral Commodity Summaries 2026, Stone (Crushed) — average unit value $18.50 per metric ton, 2025 estimate (2025 (published Feb 2026)) — $18.50 × 0.9072 = $16.78 per short ton. National average value at the quarry; delivery, screening and specialty stone cost more.
Truck operating cost
per hr
public source ATRI, An Analysis of the Operational Costs of Trucking: 2026 Update, Table 9 — average marginal cost per hour, 2025 (fuel, truck payments, repairs, insurance, tires, tolls, driver wages and benefits) (2025 data, published Jul 2026) — For-hire fleet cost before overhead and profit. Local dump and lowboy rates are usually higher; use the overhead % to adjust.
Rebar, furnished & placed
per lb
public source Florida DOT Item Average Unit Cost 2025, item 0415 1 9 Reinforcing Steel – Approach Slabs (30 contracts) (2025 lettings) — DOT installed price on large public jobs. Retail bar-only prices for small orders are often higher per pound.
Cement mason / finisher wage
per hr
public source BLS Occupational Employment and Wage Statistics, May 2025, 47-2051 mean hourly wage (May 2025) — Worker wage, not a contractor's billed rate. The labor markup below converts wage to billed cost.
Construction laborer / flagger wage
per hr
public source BLS OEWS May 2025, 47-2061 Construction Laborers mean hourly wage (flaggers are classified here) (May 2025)
Installed concrete flatwork, 4 in
per ft²
derived from source Florida DOT Item Average Unit Cost 2025, item 0522 1 Concrete Sidewalk and Driveways, 4" — $68.76/yd² (156 contracts) (2025 lettings) — $68.76 ÷ 9 ft²/yd². Florida public-works price, scaled to your state; a cross-check, not a quote.
Labor markup (wage → billed rate)
per ×
starting estimate Starting estimate covering payroll taxes, insurance, benefits, overhead and profit. Many contractors land between 1.6× and 2.5×.
Hauler overhead & profit
per %
starting estimate Starting estimate added on top of the ATRI operating cost.

Email these results

We send one email with these results to the address you enter — nothing else. We don't store your address or add it to any list.

Get a real quote

Calculators get you close. A local company can quote your exact job.

How to use this calculator

  1. Enter the driveway or slab size and thickness.
  2. Choose base depth, reinforcement and finish.
  3. Add tear-out of old concrete and a pump if needed.
  4. Pick your state or ZIP, then replace any price you have a local quote for.

Formulas

  • Concrete = order yd³ × ready-mix price (+ short-load fee if under the minimum)
  • Labor = crew hours × wage × labor markup (payroll taxes, insurance, overhead, profit)
  • Crew hours = area ÷ crew output (ft² per crew-hour)

Questions

How much does a concrete driveway cost per square foot?

It varies widely by region, thickness and finish. As one public reference, Florida DOT's 2025 average bid for 4 in concrete sidewalk was $68.76 per yd² (about $7.64/ft²). Use the calculator with your local prices.

What drives the cost most?

Labor and finish. Stamped or colored finishes can double the price of plain broom-finished concrete.

Why is there a labor markup?

Wages from the Bureau of Labor Statistics are what workers earn. Contractors bill more to cover payroll taxes, insurance, equipment, overhead and profit. The 2.0× default is an editable estimate.

Sources & assumptions

Prices checked 2026-11-10. State pricing multiplies national figures by the U.S. Bureau of Economic Analysis regional price parities (goods for materials, services for labor and services). RPPs compare general consumer price levels (U.S. = 100). They are not construction-specific; we use RPP Goods for materials and RPP Services: Other (excludes rents) for labor and services.

Starting estimates No public price series was found for: Welded wire mesh sheet (8×20 ft); Integral color premium; Sealer; Exposed aggregate premium; Stamped concrete premium over plain; Boom pump hourly rate; Pumping charge per yard; Concrete breakout & loading; Concrete recycling / disposal; Short-load fee (per truck under the minimum); Labor markup (wage → billed rate); Hauler overhead & profit. These defaults are editable placeholders — replace them with a local quote.

Results are planning estimates, not quotes or engineering advice. Codes, specifications and your supplier's numbers govern.

Related calculators

All calculators →